PVC Washing Machine Fill Hose 6ft: Prevent Laundry Floods
By Maintenance Depot Plumbing Team · Last reviewed
Quick answer
The #8326 PVC washing machine fill hose is 6ft long with 3/4" female fittings, handles hot or cold water up to 140°F and 125 PSI, and includes rubber washers. Replace fill hoses every 5 years.
A burst washing machine hose can release a lot of water in minutes. The PVC washing machine fill hose, 6ft (#8326) connects your water supply to your machine, and replacing old hoses is one of the easiest ways to prevent a flood.
Specs at a glance
| Spec | Detail |
|---|---|
| Product | Washing machine fill hose |
| Model | #8326 |
| Length | 6 ft |
| Fittings | 3/4" female thread both ends |
| Max temperature | 140°F |
| Max pressure | 125 PSI |
| Included | Rubber washers |
When to replace your hoses
Replace washing machine hoses every 5 years, or sooner if you see:
- Bulges or blisters
- Cracks near the fittings
- Rust or corrosion on the connectors
- Damp patches behind the machine
How to install
- Turn off both supply taps.
- Place a towel down and unscrew the old hoses.
- Check that a rubber washer is seated in each end of the new hose.
- Screw the hose onto the supply tap by hand, then add a quarter turn with pliers.
- Connect the other end to the machine inlet the same way.
- Turn the water on slowly and check for drips.
Tips
- Leave about 4" behind the machine so hoses don't kink.
- Turn off the supply taps when you go away for a long time.
Also check the drain hose. Maintenance Depot stocks the Eastman 6" washing machine drain hose.
Frequently asked questions
How often should washing machine hoses be replaced?
Every 5 years, or sooner if they bulge, crack or corrode.
Can it be used for hot water?
Yes, it can be used with hot or cold water up to 140°F.
How tight should the fittings be?
Hand-tight plus about a quarter turn with pliers.
Buy PVC Washing Machine Hose 6ft -#8326 at Maintenance Depot